Hydrogen Peroxide Sterilizer

  • On December 12, 2022
3new
12 Dec
6696196 161841372000 2
The importance of disinfection

The need to disinfect the air in the space
and the surfaces of objects

     Air is a vector for the spread of many diseases. Airborne transmission is characterized by rapid spread, extensive coverage, difficulty in control, and serious consequences. In particular, SARS and other airborne respiratory infectious diseases continue to emerge, and the issue of air disinfection and purification has become a prominent public health problem. Studies have shown that cholera virus, influenza virus, coronavirus, Clostridium difficile, VRE, MRSA, norovirus, and mold can survive on the surface of inanimate objects and become infectious sources leading to infection. vre and MRSA can survive on the surface of objects for days to weeks. Approximately 20-40% of virus transmission is due to direct hand contact or indirect contact with surfaces of objects infected with the virus.
      Some studies have shown that the cleanliness of environmental object surfaces and disinfection of object surfaces can effectively control the spread of infectious diseases. First, object surface disinfection can reduce pathogenic microbial load levels and can kill or remove contaminated pathogenic microorganisms and multi-drug resistant bacteria. Second, disinfection of object surfaces can interrupt the spread of pathogenic microorganisms.

Machine use process

caozuobuzhou

♥ Step 1

Place the equipment in the center of the space site, ensure that the equipment is placed smoothly, and then fix the universal wheel.
♥ Step 2

Connect the power cord, make sure the power supply has a reliable ground wire, and turn on the power switch at the back of the machine.
♥ Step 3

Inject the disinfectant solution from the injection port. (Recommend using the disinfectant solution that matches the original machine).
♥ Step 4

Click on the touch screen to select the disinfection mode, choose automatic disinfection or custom disinfection mode of work.
♥ Step 5

Click the "Run" button and the machine will start working.After disinfection, the machine will beep and the touch screen will show whether to print this report.

The following matters should be noted when using

1
2
3
4
5

Please read the instruction manual carefully before use and connect the power cord correctly.


Please use the original disinfection solution matched with the machine to avoid damage to the machine or affect the disinfection effect.

After the first work and several times work, when the liquid volume is lower than the lowest liquid level line of the sight glass, you should add a certain amount of disinfectant, and the liquid volume added to the disinfectant each time should not exceed the highest liquid level line of the sight glass.

Take the disinfection liquid and inject it into the "liquid injection port/atomization outlet" of the hydrogen peroxide compound factor disinfection machine, and the amount to be added shall not exceed the highest liquid level line in the sight glass.

During the operation of the machine, it is strictly forbidden to add disinfectant to the "liquid injection port/atomization outlet".

Advantages of using YE-5F hydrogen peroxide compound factor disinfection machine

      First of all, there are a variety of disinfection factors, disinfection cycle is short, good disinfection effect, disinfection space, high coverage, the traditional disinfection methods adopted in the past, whether it is wiping and soaking the surface of the object, or spraying, fumigation and other ways, there are many drawbacks, while the use of YE-5F hydrogen peroxide compound factor disinfection can do scientific disinfection, efficient disinfection, accurate disinfection.

Conventional disinfection methods

x1

Physical disinfection method

Generally have ultraviolet radiation / high temperature steam, etc. generally need to be unoccupied environment, the use of environmental restrictions

x3

Disinfectant disinfection method

Peroxyacetic acid / hydrogen peroxide and other disinfection factors single, easy to produce drug resistance, difficult to disinfect, disinfection is not complete.

x2

Spraying, fumigation method

such as formaldehyde fumigation, vinegar fumigation, moxa roll fumigation, etc. generally have a stimulating odor, harmful to people, and the operation is cumbersome, the use of environmental restrictions.

x4

Wipe, soak method

Such as alcohol, 84 disinfectant, bleach and other germs easily transferred from the surface of an object to the surface of another object.

Newer Company News